If you run a KMT waterjet system, you already know the challenge: the part you need is identified only by a reference number that may appear in three different formats, and a wrong order costs a full shipping cycle to correct.
This guide gives you a repeatable method for identifying KMT-compatible replacement parts, whether you order from us or anywhere else. It covers where to find the reference, how to break the machine into assemblies, common mismatches to watch for, and exactly what information gets you a fast, accurate quote.
About our role: SNOW JADE is an independent industrial parts supplier and procurement coordinator working with partner factories in China. We are not KMT, we are not authorised by KMT, and we are not affiliated with or endorsed by KMT. We do not sell original branded parts; we supply compatible replacement parts. Compatibility is not assumed or universal — it is confirmed individually for each order against your machine’s reference numbers, and where a match cannot be verified we will tell you plainly rather than guess on your behalf.
Start with the reference number, not the part name
The single most useful piece of information is the complete part reference as it appears on the machine, in the manual, or on a previous invoice. KMT references identify specific assemblies and components — they are more precise than any part name.
Three rules when reading references:
- Copy the complete reference, including prefixes and suffixes. A shortened or partially read number can point to a different revision or a different assembly entirely.
- Note where you found it. “On the part itself”, “in the pump parts list”, “on an old invoice” each carry different reliability — tell us which.
- Photograph nameplates. Pump and cutting-head nameplates give the model identifiers that tie the reference to your exact configuration.
Our guide on finding waterjet parts by reference number walks through this process in detail and explains how reference number, SKU, and model differ.
Break the machine into assemblies
KMT systems, like most intensifier-based waterjets, are easiest to work with when you identify parts by assembly rather than by the whole machine:
- Cutting head and nozzle components — orifice carriers, nozzles, mixing tube holders, and the head body itself. See the cutting head parts category.
- Mixing tubes and orifices — the wear consumables replaced most often. See mixing tubes and jewel orifices.
- High-pressure end — cylinders, plungers, check valve bodies, and the associated seals and fittings. See high-pressure parts.
- Valves and repair kits — on/off valves, check valve kits, and seal service kits. See valves and repair kits.
Naming the assembly in your enquiry (“check valve assembly, high-pressure end” rather than “a valve”) removes most of the ambiguity before quoting even starts.
Common mismatches — and how to avoid them
- Revision differences. The same reference with a different revision suffix can mean a different seal package or thread form. If your machine is older, tell us the year or serial range.
- Inch/metric confusion. Threads and fittings on imported machines are a frequent source of wrong orders. When in doubt, measure and photograph rather than converting from memory.
- Similar names, different parts. “Check valve”, “on/off valve”, and “end cap” appear in overlapping part lists. Attach a photo of the old part — it resolves this in seconds.
- Assuming brand-family compatibility without confirmation. Parts across related brands sometimes interchange and sometimes do not. We state compatibility only where it has been confirmed for your specific reference; otherwise the quote will say “to be confirmed”.
- Ordering seals by pump model only. Seal kits are specific to the cylinder and pressure configuration. Include the pump serial number when ordering seal items.
The pre-order checklist
Before you send an enquiry, make sure you have:
- Machine brand, model, and serial number (or year)
- The complete part reference, copied exactly
- A photo of the old part (both sides if marked)
- The assembly it belongs to
- Quantity required — including any stock you want to hold
- Your preferred shipping arrangements, if any
Five minutes with this checklist typically saves a full reorder cycle.
What happens after you send it
We match your reference against our catalogue and our partner factories’ current production data, confirm the compatibility status explicitly, and quote with lead time. If a reference cannot be matched, we will tell you what additional identification we need — usually a photo or the machine nameplate — rather than shipping a maybe.
Request a quote
Send your list through the contact page, or browse the full waterjet parts catalogue or the brands directory first. For wear consumables, see also our guides on mixing tube sizes and the FLOW PASER cutting head checklist — the same identification discipline applies across brands.